Versatile and Chic – DIY Copper Cup and Leather Kitchen Organizer

There’s one thing magical concerning the mixture of shiny, shining copper and leather-based. The 2 textures and sheens and vibes mix and play off one another so properly. It doesn’t matter what your type, this text is a tutorial for an ideal DIY copper cup holder with leather-based straps. The top end result just isn’t solely lovely, nevertheless it’s versatile and practical as properly. Use as many or as few copper cups as you need or want. Mount it in your rest room, kitchen, workplace, laundry room…the chances are nearly limitless. And, bonus, it’s a quick and straightforward DIY undertaking! Let’s get began.

DIY Copper Cup Holder

DIY Copper Cup Holder Closer look

DIY Degree: Newbie

DIY Copper Cup Holder Materials for Project

Supplies Wanted:

  • Copper cups, as many or as few as you need (4 are proven right here, however I solely used three)
  • three mm leather-based (or suede leather-based) twine within the colour of your selection
  • 1×6 pine board, minimize to the size/peak you want
  • Paint or stain, staple gun, drill

Paint or Stain your board

Step 1: Paint or stain your board. Relying in your choice, you’ll be able to paint or stain your board right here to be the inspiration of your copper cup organizer.

Spray paint primer

Within the curiosity of time, I used white spray paint + primer in a single. Spray it on in mild strokes to stop dripping, about 4 or 5 coats.

Let it dray

Let it dry completely.

Copper cup placement

Step 2: Decide copper cup placement. The board I used is 31” tall, and I needed to make use of three copper cups. One of the best distance for his or her use (for pencils and straws to suit simply) was 9” from the underside of 1 cup to the underside of the opposite. (Every cup is four” tall). Dry-run area the cups as you see right here.

Mark and drill holes

Step three: Mark & drill holes. Holding every cup in place, make mild pencil marks on both aspect of the highest of the cup. These are momentary marks, so hold them small and lightweight.

Move the cups from the board

Transfer the cups from the board and use a sq. to mark new holes which are precisely degree and centered – 1-three/eight” in from every edge works properly for this.

DIY Copper Cup Holder Drill Holes

Drill holes within the second marks. Your drill bit ought to be large enough to suit the leather-based twine snugly however simply. For 3mm twine, a 5/32 bit works properly.

Attach copper cups

Step four: Connect copper cups. Thread the top of your leather-based twine by means of one of many holes, from entrance to again.

DIY Copper Cup Holder Leather Cord

Staple the top of the leather-based twine down. Staple a number of occasions to ensure it’s safe.

Wrap the leather cord

Wrap the leather-based twine as many or as few occasions across the prime of the cup as you need. Tip: If doing greater than two wraps, work from the middle out. Cross the leather-based twine behind the cup in order to maintain a clear, crisp take a look at the entrance. Reduce the twine lengthy sufficient to string by means of the second gap in your board AND staple down on the again.

Pull the leather taut

Pull the leather-based taut, double verify that it seems to be clear and the leather-based crossed (if relevant) isn’t seen. Thread the top of your leather-based twine by means of the opening.

Pull the second cord

DIY Copper Cup Holder Taut

Pull the second twine taut and staple on the again. Tip: Staple the twine at a proper angle to offer additional help and stability.

Repeat for al copper cups

Step 5: Repeat for all copper cups. Connect all copper cups in the identical means. You’re nearly carried out!

DIY Copper Cup Holder Mount

Step 6: Mount the copper cup organizer. A method to do that is to predrill screw holes within the 4 corners of your pine board and screw it to the wall, then paint the screw heads so they don’t seem to be noticeable

DIY Copper Cup Holder Project

Step 7: Fill your organizer cups. You’re completed! All that you must do is put your new stylish leather-based and copper organizer to good use.

DIY Copper Cup Holder Kitchen

Within the kitchen, napkins are all the time good to have useful. This accomplishes that with out taking over valuable counter area

DIY Copper Cup Holder Storage Organizer

Plus, it’s simply such a reasonably addition to the kitchen. (And when you like these fake concrete counter tops, take a look at the DIY tutorial right here)

DIY Copper Cup Holder View

I really like the additional sparkle and shine they add to an in any other case plain area.

DIY Copper Cup Holder Tutorial

We hope you take pleasure in your new leather-based and copper cup organizer! For those who’re in love with copper, take a look at our easy and easy DIY journal holder that comes with this most beautiful metallic.

  • Facebook
  • Google Plus