DIY Mason Jar Soap Dispenser

We’ve all obtained a mason jar or two mendacity round the home, so why not put them to good use with this straightforward and reasonably priced mason jar cleaning soap dispenser? Impressed by milk glass from the 1930’s, this dispenser provides an enormous dose of classic aptitude to any kitchen countertop. One hour and some easy supplies is all that you must create this enjoyable and useful addition to your kitchen.


  • 1 Pint-sized mason jar with lid and band (not broad mouth)
  • 1 Cleaning soap pump. I used a pump from a soap dispenser I already had at house, however any pump will do. Even the plastic pumps on low cost handsoap bottles from the grocery retailer work nice!
  • Lacquer white spray paint
  • Paring knife
  • Heavy obligation all-function glue
  • Wonderful grit sand paper

Painted mason jar.

1. Apply spray paint to the surface of the mason jar and let dry (about 20 minutes).

2. Use a paring knife to chop a gap within the prime of the lid roughly the dimensions of the straw/pump mechanism on the underside of the cleaning soap pump.Don’t fear concerning the uncooked edges of the opening. They are going to be hid.

three. Slide the cleaning soap pump via the highest of the lid gap created in step 2.

four. Apply all function glue to the underside of the lid to safe the pump mechanism to the lid. Let dry roughly half-hour.

5. Place the lid/pump on the mason jar, adopted by the mason jar band. Screw the band on tightly.

6. Put on away a little bit of the paint on the raised jar lettering with wonderful grit sand paper. Use brief, mild strokes in a single course to rigorously sand away bits of the paint.

Word: If utilizing in a excessive visitors space, chances are you’ll need to seal the jar with a transparent, non-yellowing sealer to permit for stronger sturdiness.

  • Facebook
  • Google Plus