DIY Hanging Rope Shelf

Add one thing additional to an empty nook or wall with this hanging rope shelf. Keep away from a number of holes within the wall by hanging this from the ceiling from 1 easy hook towards the wall to show your favourite gadgets. Good for renters or people who like to vary up their decor typically and get uninterested in placing holes within the wall!

hanging rope shelf how to

rope shelf supplies


  • drill or drill press
  • 5/eight inch drill bit
  • thick rope
  • heavy obligation scissors
  • clamps
  • paint
  • paint brush
  • 2 rectangular items of plywood reduce to desired measurements

how to make a hanging rope shelf


1. Begin by prepping your wooden. The two items of plywood that you simply use ought to be equal in measurement. You’ll be able to reduce them down your self with a desk noticed or have them reduce down for you on the ironmongery shop. Sand down the edges if wanted.

2. Stack the 2 items of wooden on prime of one another and use your clamps to clamp them collectively.

hanging rope shelf tutorial

three. After you have clamped your wooden into place, use your drill with a drill bit giant sufficient to accommodate the width of the rope that you’re utilizing to make a gap in every nook. Right here we used rope that was roughly three/eight inch thick so we used a 5/eight inch drill bit to make the holes.

When you discover it too troublesome to drill by way of each items at one time, rigorously measure and mark all of the holes in every nook for every board and drill them separately. You need to be sure that your holes line up intently one on prime of the opposite in order that your shelf is straight.

four. As soon as your holes are completed, paint the sides of the wooden a vibrant and enjoyable shade. This half is completely elective and you will get artistic right here. You would paint all the piece of wooden, simply the sides, or depart them plain. Completely as much as you and what is going to look good together with your decor!

5. Subsequent reduce four items of rope equal measurement. You’ll probably need to reduce them on the longer aspect, roughly four-5 ft every to offer sufficient slack for the knots and hanging down from the ceiling. This measurement will rely in your ceiling peak and the way far aside you need the cabinets so decide this primary earlier than slicing.

how to make a rope shelf

Keep in mind you’ll be able to all the time minimize the rope down if wanted however you possibly can’t add on any additional slack, so higher to make it too lengthy than too brief!

6. To assemble the shelf, tie a knot on the finish of every piece of rope and thread via the underside shelf. Tie a second knot on the location the place you want to your prime shelf to lie. Measure this distance and repeat for the opposite three items of rope. Attempt to hold the knots spaced as evenly as attainable to maintain your shelf straight.

7. Lastly take all the surplus rope on the prime and tie a knot. If lengthy sufficient, you’ll be able to cling this immediately from the ceiling on your shelf. If not, chances are you’ll need to add additional rope or twine to hold.

hanging rope shelf DIY

When hanging your shelf hold near the wall in order that it doesn’t spin round. Probably you’ll grasp it from a hook within the ceiling. When you’ve got a really lengthy hook you may as well attempt hanging it off the wall as properly. Stage with the gadgets you want to retailer and your challenge is full!

hanging rope shelf how to

rope shelf DIY

DIY hanging rope shelf

  • Facebook
  • Google Plus