DIY Framed Fabric Organizer

Maintain your workplace or craft room good and tidy with this stylish organizer made of cloth and a repurposed body. Utilizing enjoyable material and a daring colours, this straightforward little challenge won’t solely hold you organized however brighten up your workplace area too! Use iron on binding so no stitching is important and whip this one up in a spare half hour!


  • body
  • spray paint (non-compulsory)
  • sand paper
  • 1 yard of cloth (actual quantity wanted will depend upon the dimensions of your body)
  • staple gun
  • staples
  • ruler
  • iron on material fuse
  • iron
  • ironing board
  • material scissors


1. Begin by prepping your body for paint. Clear and scuff up the body’s end with sandpaper so it can take paint higher. This step is optionally available. You possibly can depart your body as is for those who favor, or paint it a vibrant and cheerful shade!

2. Spray paint the body with a couple of coats of spray paint, permitting correct drying time between every coat (as indicated on the again of the bottle).

three. Whereas the paint is drying in your body, iron your material to prep for chopping.

four. Measure the width of your body and lay out the way you want to arrange your organizer board. Right here we went with 2 pockets. To create this we reduce 1 giant piece that was a number of inches wider and taller than the opening of the body and a couple of strips that have been 1/2 the dimensions of the bigger piece. These can be skinnier strips.

5. With the two skinny strips, hem the highest sides through the use of a bit of iron on binding to fold over a small sliver of the material and fuse it to itself.

6. When each items have been hemmed, connect them to the massive piece of cloth that you simply minimize for the background. Right here we staggered the two skinny items of cloth to create rows. The primary one we positioned instantly in the midst of the bigger piece of cloth. Use one other piece of iron on binding and the iron to connect the underside a part of the highest material to the again piece of the bigger material.

7. Repeat step 6 however with the second piece shifted to the underside of the bigger piece of cloth. It will create the second pocket and provides the pockets a staggered look.

eight. Lastly, use a staple gun with brief staples to staple the material in place on the again of the body. Pull the material tight to maintain the pockets and the background material secure.

Retailer your paint chips, letters, notebooks, workplace notes or different papers within the pockets to maintain your area organized!

  • Facebook
  • Google Plus